WD Custom Pickguard For Single Humbucker, Dual Single Coil Fender Stratocaster #28R Red Pearl/White/

This pickguard was designed in the 1970's when many players were removing the single coil bridge pickup and routing the body to install a humbucker in the bridge position.We have included options to modify the pickup cuts for HHS, HSH, or HHH configurations(upcharges apply). This pickguard will only fit genuine Fender® U.S. (post 1963) or Fender® made in Mexico (post 2002) Stratocasters® with two single coils in the neck and middle position, and a standard humbucker in the bridge position located 3/8 inches from a vintage/standard bridge cutout. Please note, if you choose the Floyd Rose® bridge cut on this template it will effect the amount of material between the bridge cut out and the bridge pickup due to the Floyd Rose® bridge's deeper cut. This pickguard uses the same mounting hole pattern as current Fender® Stratocaster® guitars, but is not a current Fender® Stratocaster® production replacement pickguard. For the current Fender® production HSS pickup pattern please see the STQ-200 series pickguard template. It will not fit Squier®, Fender® Japan, Korea, Indonesia or China production instrument. While many manufacturers may make a similar model instrument, this does not mean each pickguard of this type is interchangeable.