Fender Tweed Blues Junior 1x12 Combo Guitar Amp Cabinet







Product Description
Our take on a Tweed Blues Jr. Cabinet®. Our version is slightly larger than the standard Blues Jr. Cabinet. Since you won't be able to use the side mounting holes, we use threaded inserts on our back panel for extra chassis support. This cabinet comes with all the chassis mounting holes predrilled. The shell is made out of solid pine with handmade ¼" finger joints. The baffle board and backpanels are made out of 100% void-free Baltic birch ply.
All Reproduction Cabinets Come Pre-Drilled For Blues Jr Chassis
Handmade in the USA
Blues Junior® is a registered trademark of Fender Musical Instruments Corporation
Dimensions:(H) 16" x (W) 20" x (D) 9-1/2" Mounting Holes:Chassis holes are drilled for Mojotone chassis Chassis Cut Out:12-1/2" Covering:Fender Style Tweed Olive Stripe Coated Grill Cloth:Fender Style Oxblood w/ Gold Stripe Hardware:Flat Brown Leather Handle, Chrome Glides Speaker Cut Out:1x12 Wiring Harness:Not Included Please note: Our version is slightly wider than the original Fender® shell. You will no longer need the side mounting chassis support, nor will you need the top mounting chassis support. The top back panel is installed with threaded inserts and machine screws and is pre-drilled to match the same holes on the OEM chassis. Simply remove our top back panel, attach your chassis to the panel and then mount the back panel with chassis installed onto the cabinet shell.
Dimensions:(H) 16" x (W) 20" x (D) 9-1/2" Mounting Holes:Chassis holes are drilled for Mojotone chassis Chassis Cut Out:12-1/2" Covering:Fender Style Tweed Olive Stripe Coated Grill Cloth:Fender Style Oxblood w/ Gold Stripe Hardware:Flat Brown Leather Handle, Chrome Glides Speaker Cut Out:1x12 Wiring Harness:Not Included Please note: Our version is slightly wider than the original Fender® shell. You will no longer need the side mounting chassis support, nor will you need the top mounting chassis support. The top back panel is installed with threaded inserts and machine screws and is pre-drilled to match the same holes on the OEM chassis. Simply remove our top back panel, attach your chassis to the panel and then mount the back panel with chassis installed onto the cabinet shell.