Capital Custom Bundle: Canvas Mono: Line Isolator/D.I and IK Multimedia Tonex ONE AI Modeling Multi-FX Pedal

Take your signal to the next level! Combining the Tonex One and the Canvas Mono, you will get the best out of your signal without compromising any gain or volume!,
,
You are the artist. Your sound is the paint, and this is your canvas. The Canvas Mono is a Direct Box/Line Isolator designed to remove any resistance between you and your audience by giving a pristine sonic foundation to build your masterpiece upon. From houses of worship to the dive bar downtown, Canvas Mono is built to be the performance tool that goes wherever you are making your music. ,
,
Canvas Mono is a Passive Line Isolator (LI) and Direct Injection (DI) device that converts your unbalanced signal into a balanced signal for interfacing properly with your recording interface or mixer at front-of-house. If you’re using an amp-in-a-box (DSP Guitar Rig), like our ACS1, or running an acoustic or bass guitar direct, then the Canvas Mono is your new bridge to the front-of-house. The Canvas Mono packs everything you need from a DI/LI into a standard pedal-sized enclosure designed to look great right on top of your board.,
,
Canvas Mono Features,
,
Flat frequency response from 20Hz-20kHz,
Converts ¼” unbalanced input to XLR balanced output.,
Transformer isolated output.,
Sum switch turns the Thru channel into a second input when engaged, allowing stereo input signals to be summed to the XLR output.,
Pad: Enables a -15dB input pad (Only in D.I. mode) for reducing hot signals in order to minimize distortion.,
D.I./L.I.: Choose between DI or LI (Out for DI, In for LI),
GND Lift: Isolates the GND pin on XLR to help reduce hum if present. Leave out for normal operation.,
Custom wound transformers for low THD (Total Harmonic Distortion) and full frequency response.,
Direct Injection: ,
,
Use DI mode when connecting an unbalanced, high impedance source (Electric Guitar, Bass Guitar, etc). The signal will be reduced by -20dB (-35dB with pad engaged) and converted to a balanced signal via the transformer connected to the XLR output. Use the gain on your mixer or preamp to bring the signal up to line level.,
,
Line Isolator: ,
,
Use LI mode when connecting your unbalanced, low impedance source (Amp + Cab Sim like the ACS1, keys, etc.). The signal will remain full volume and be converted to a balanced signal via the transformer connected to the XLR output. Less preamp gain will be required in LI mode. ,
,
DI or LI?,
,
When deciding between DI or LI, check with the manufacturer of your gear to find the output impedance of the device you are wanting to interface with. For a general guide:,
,
High Impedance = anything above 1k = Use DI,
,
Low Impedance = less than 1k = Use LI,
,
Troubleshooting:,
,
This is a passive device, so you will not damage anything if connected improperly, but it could affect the signal level and frequency response if not connected properly. This is an easy thing to test since the LI/DI switch is built into Canvas. If you lose high-frequency information when using LI mode, then you should probably be in DI mode.,
,
TONEX ONE expands the TONEX Ecosystem bringing breakthrough AI Machine Modeling technology to a mini pedal format, empowering players to take the world's most sought-after tones anywhere.,
TONEX ONE works with any guitar or bass rig including real amps, PA systems, or FRFR cabinets. It fits easily on any pedalboard and is small enough to add multiple units without sacrificing valuable space. Choose from a library of thousands of rare, one-of-a-kind amps and rigs, or use the included TONEX software to model your own gear to take your custom tone anywhere. Build the perfect fly rig or enhance your existing pedalboard with the best tones on the planet. Includes 200 Premium Tone Models of your choice, access to over 25,000 free user Tone Models on ToneNET, and the option to expand with premium Tone Partner and Signature collections. It gives you everything you need to create the perfect tone live or in the studio.,
,
- AMP / RIG: Load up to 20 presets with 3 playable slots to use any time. You can load any combination of pedal, amp and whole-rig models.,
STEREO/MONO: Mono input and stereo/mono TRS output that doubles as a headphone out for silent playing.,
,
- TWO PERFORMANCE MODES: Select between two performance modes: Dual A/B or on/off operating modes.,
,
- CUSTOMIZABLE MICRO-KNOB COLORS: Choose from 9 custom colors to assign and save to any preset for visual identification during live performances. You can also turn off the light for more formal settings.,
,
- IR LOADER: Load any custom IR or use IK's VIR(TM) cabinets to fully customize your sound.,
EFFECTS/UTILITY: Includes an onboard tuner, noise gate, EQ and compressor, and 5 stereo reverbs including hall, room, plate, and 2 spring reverbs.,
,
- The included TONEX SE software can be used to capture your rig, organize and transfer Tone Models, as a standalone application, or a plug-in integrated with your DAW to enjoy the exact same tone you use live in your studio productions. Plus TONEX ONE also doubles as a 24 bit/44.1 kHz USB audio interface, so you don't need any other gear to plug into your studio. Record with or without the onboard preset for low-latency recording.